How It Works
It Soaks In. It Does Not Sit On Top.
DryLock penetrates deep into concrete, then hardens and seals it from the inside. No film to peel, nothing to mix, and your floor is back in service the next day instead of a month from now.

30 Min
Back to traffic on fast-cure systems.
Next Day
DryLock floors back in service.
7 Days
DryLock full cure. Conventional coatings need about 30.
Zero
Mixing, petroleum or PFAS chemicals.
Why It Lasts
Nothing on Top to Wear Off.
Most coatings form a layer over the concrete. Traffic, manure acids and pressure washers attack that layer until it peels. DryLock goes into the concrete instead, so the protection is part of the floor.
Sits on the surface
Topical Sealers & Epoxy

Dries into a film on top of the slab
Hooves, scrapers and washers wear it through
Needs acid etching or primers before it bonds
7 to 30 days before full strength
Penetrates and hardens
DryLock

Soaks deep into the pores of the concrete
Reacts inside and hardens the slab itself
Prep is a pressure wash and scrape
Back in service the next day, fully cured in 7
The Process
Four Steps. No Downtime.
Designed so your own crew can do it with standard equipment, working in sections while the rest of the operation keeps running.
01
Clean
Pressure wash and scrape the surface so the coating can soak in.
02
Apply
Spray or roll it on. Single-component, so there is nothing to mix and no pot life to beat.
03
Back in Service
Traffic returns the next day with DryLock, or in about 30 minutes on fast-cure systems.
04
Full Cure
DryLock reaches full hardness in 7 days while the floor stays in use.
Cure Time
Days, Not Weeks.
A conventional coating ties up a barn alley or parlor for about a month. Pick the AgLoc system that matches how long you can be without the space, down to 30 minutes.
Fast-cure systems
30 minutes
DryLock, back in service
Next day
DryLock, full cure
7 days
Conventional coatings
About 30 days
Our Install Crew
We Handle It, Start to Finish.
Skip the learning curve. Our crew scopes the floor, picks the right system and applies it around your schedule, so your operation keeps running.
01We scope the jobWe look at the floor, how it is used and what it has to stand up to.
02We pick the systemThe right coating for each area, from alleys and parlors to pads and pens.
03We work around youInstalls planned around milking, feeding and chores. Fast-cure options are back to traffic in about 30 minutes.
04One call, done rightOur crew handles the prep and the application. You get your floor back.
Two Ways to Get It Done
Use Your Own Labor, or Ours.
Your crew, your schedule
Do It Yourself
Order online or by phone, ships anywhere
Open, stir and apply. No mixing.
Standard sprayer or roller
Install guides and phone support
Our crew, start to finish
We Install It
We scope the job and pick the system
Work planned around your operation
Fast-cure options for zero downtime
One call, done right
How It Compares
Why Not Just Seal It or Replace It.
| AgLocPenetrating coating | Topical Sealer | Generic Epoxy | Replace the Surface | |
|---|---|---|---|---|
| Soaks In and Hardens the Surface | Yes | No | No | n/a |
| Clean-and-Coat Prep | Yes | Yes | No | No |
| Back in Service | 30 min to next day | Days | 7–30 days | Weeks |
| Full Cure | 7 days | Days | 7–30 days | 28+ days |
| Non-Petroleum, Safe Around Animals | Yes | Varies | No | n/a |
| Install It Yourself | Yes | Yes | Rarely | No |
PFAS Chemical-Free
No contamination concern around feed or milk.
Non-Petroleum
DURAPAVE keeps petroleum out of areas animals walk.
Water-Based
Low odor, no solvents, easy cleanup.
Made in USA
Every product, start to finish.
Let’s Talk About Your Floors.
Tell us what you are working with and we will match the right coating. Or call (715) 651-2767.
